- Ensure that the power can be reliably universal joint crosswhen the relative position of the two connected shafts changes within the expected range;
- Ensure that the connected two shafts can run evenly. The additional load, vibration and noise due to the included angle of the universal joint should be within the allowable range;
- High universal jointefficiency, long service life, simple structure, convenient manufacture and easy maintenance. For automobiles, because the output shaft of a cross-shaft universal joint has a certain included angle relative to the input shaft, it rotates at unequal speeds. For this reason, double universal joints or multi-universal joints must be used for universal joint, and the same The two universal joint forks connected by the universal jointshaft are arranged on the same plane, and the included angles of the two universal joints are equal. This is very important. The angle of the universal joint should be minimized when designing.
Constant velocity universal joints also need regular maintenance. In order to ensure the dynamic balance of the drive shaft, you should always pay attention to whether the balance welding lugs are unsoldered. The new drive shaft assembly is provided as a complete set. When installing the new drive shaft, pay attention to the assembly mark of the telescopic sleeve and ensure that the flange fork is in a plane. When repairing and disassembling the drive shaft, the assembly mark should be printed on the telescopic sleeve and the flange shaft in order to keep the original assembly of U-Joint With Brackets Tapered Kits relationship unchanged during reassembly.